DJI WooKong-M - Manual (Page 21)

©2013-2014 DJI Innovations. All Rights Reserved. 21 |
If the LED Bluetooth Module Status Indicator does not be solid red on, then the LED Bluetooth
Module works abnormally. There are following situations:
(1) The main controller firmware version is not matched, please upgrade the main controller.
(2) There is something wrong with the connection between the LED Bluetooth module and main
controller, please check the connection.
(3) The LED Bluetooth module is damaged, please contact your dealer.
iOS Device List
iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 3, iPad 4
Refer to the WM Assistant for more details.
The gain value displayed on Mobile Device and PC may be a little different, that is OK for use.
Step
4
Flying Test Procedures
1. Get the aircraft ready, run the WM Assistant and make sure it is connected with the main controller. (The
indicators on the WM Assistant are )
2. Start the motors.
3. The “View” page shows the relative parameters real-time when flying.
4. Go to the “Basic” and click into the “Gain” page to set the values of all gains real-time during flying.
5. Go to the “Advanced” and click into the “Gimbal” page to configure the gimbal real-time during flying.
6. Finish the flying and land your aircraft.
Only the parameter referred above can be changed during flying. Others can be configured after
landing.
Forgot Main Controller Password
When connecting to the WooKong M flight control system to the WM Assistant using a mobile device for the first
time, users will be asked to set a name and password for the WooKong M main controller. If the password is
forgotten, users can connect the flight control system to Assistant software on a PC and click “Reset Bluetooth
Info” in the Tools page to reset username and password. Once complete, set a new username and password as
before.
How to Activate More Functions
In the Future you might be asked to fill in the new S/N in the future if you brought new function upgrades. Fill-in
the S/N and then click Write button. If you filled in an invalid S/N over 30 times, your MC will be locked and you
have to contact our customer support.