Calculated Industries 4095-A User Guide - Manual (Page 9)

U
ser
’
s
G
Uide
— 7
Weight/Volume Functions
 
Weight/Volume – Stores a new weight volume
as pounds per cubic feet or other format as shown
below. Default value is 62.42796 pounds per cubic
foot of water (1000 kG/m3).
● LB per CU FEET
● LB Per CU INCH
● LB per GAL
● Kg PER CU M
● kG per liter
 7
Pounds (lbs) – Enters or converts a weight or
volume value to pounds.
 
Kilograms (kg) – Enters or converts a weight or
volume value to kilograms.
Circle Key

Enters diameter and calculates circle area and
circumference.
Trigonometric Keys

Finds the sine of a degree or undimensioned value.

 Arcsine (sin -1 ) – Gives the angle degrees for the
Sine value.

Finds the Cosine.
 
Arccosine (cos -1 ) – Gives the angle in degrees for
the Cosine value.

Finds the Tangent.

 Arctangent (tan -1 ) – Gives the angle in degrees for
the Tangent value.
Pipefitting Project Keys

Enters or calculates a linear Slope, Slope Angle or
Percent Grade.
UG4095E-A.indd 7 5/5/2009 9:09:28 AM