Calculated Industries 4095-A User Guide - Manual (Page 30)

28 — P
iPe
T
rades
P
ro
™
If you clear the calculator, you will only recall the last unit
shown.
KEYSTROKES DISPLAY

 0.

  M/S 0.
If you know the velocity, you can convert to other
dimensional units.
KEYSTROKES DISPLAY

 ALL CLEARED

  FPS 5.

  (feet per second) FPS 5.

(feet per minute) FPM 300.

(meters per second) M/S 1.524
Pressure Loss
If you know Flow/Velocity, Pipe Size and Length, you can
calculate Pressure Loss. If no Run (Length) is entered,
Pressure Loss per foot is calculated. For this example we will
use the default Material, Steel. Calculate for 2" Pipe with a
Flow Rate of 4 gallons per minute and then convert to different
dimensional units.
KEYSTROKES DISPLAY

 ALL CLEARED
1. Enter the Pipe Size:

  STD SIZE 2 INCH
2. Find the Area:

 (Area) AREA 3.355605 SQ INCH
3. Enter the Flow Rate:

  GPM 4.
4. Calculate Pressure Loss:
UG4095E-A.indd 28 5/5/2009 9:09:33 AM