Calculated Industries 4095-A User Guide - Manual (Page 26)

24 — P
iPe
T
rades
P
ro
™
be known as “rise” or “set”.
● Bend – the bend angle, also known as “fitting angle” or
“angle of turn”.
Note: If an angle is not entered, or if the angle is set to 0
degrees, the fitting angle is assumed to be 90º.
Calculate Pipe Length for a Rolling Offset with a 4" Roll, 5"
Offset and a 45º Fitting Angle.
SETBA
CK
LENGTH
OFFSE
T
ROLL
BEND
KEYSTROKES DISPLAY

 0.
1. Enter the Fitting Angle:

  /Ø 45.00 º
2. Enter the Offset (Height):

  OFST 5 INCH
3. Enter the roll distance and calculate the Pipe Length:

   LNTH 9 1/16 INCH
Continue pressing the Travel key to view all related values.
UG4095E-A.indd 24 5/5/2009 9:09:33 AM