Calculated Industries 4095-A User Guide - Manual (Page 12)

10 — P
iPe
T
rades
P
ro
™

FRAC 0 1/2 INCH

FRAC 0 1/4 INCH

FRAC 0 1/8 INCH
 (repeats options) FRAC 0 1/16 INCH
Second press of  :
(Area displays) AREA Std.

AREA 0. SQ FEET

AREA 0. SQ INCH

AREA 0. SQ M

(repeats options) Std.
Third press of  :
(Volume displays) VOL Std.

VOL 0. CU FEET

VOL 0. CU M

(repeats options) VOL Std.
Fourth press of  :
(Meter Linear displays) METR 0.000 M

(floating point) METR FLOAt M

(repeats options) METR 0.000 M
Fifth press of  :
(Decimal Degree displays) DEG 0.00º

(floating point) DEG FLOAt

(repeats options) DEG 0.00º
Sixth press of  :
(Fractional mode) FRAC Std.

FRAC COnSt.

(repeats options) FRAC Std.
Seventh press of  :
(Mathematical Operation) MATH OrdEr

MATH CHA1n

(repeats options) MATH OrdEr
UG4095E-A.indd 10 5/5/2009 9:09:29 AM