Dimensional function keys – Calculated Industries 4095-A User Guide User Manual
Page 8
6 — P
iPe
T
rades
P
ro
™
Accumulative Memory – Adds value to
Accumulative Memory.
(M-) – Subtracts value from Accumulative Memory.
Dimensional Function Keys
Feet – Enters or converts to feet as whole or
decimal numbers. Also used with and keys
for entering feet-inch values (e.g.,
). Repeated presses during conversions toggle
between fractional feet-inch and decimal feet.
Inch – Enters or converts to inches. Entry can be
whole or decimal numbers. Also used with for
entering fractional inch values (e.g.,
). Repeated presses during conversions toggle
between fractional and decimal inches.
Fraction Bar – Used to enter fractions. Fractions
can be entered as proper (1/2, 1/8, 1/16) or
improper (3/2, 9/8). If the denominator (bottom) is
not entered, the calculator’s fractional accuracy
setting is automatically used. Results are always
shown in typical building fractional format.
Identifies/Converts to gallons per minute
(GPM)
Identifies/Converts to liters per second
(l/s)
Identifies/Converts to cubic feet per minute
(CFM)
Identifies/Converts to cubic feet per second
(CFS)
Identifies/Converts to ºC
Identifies/Converts to ºF
Meters – Enters or converts to meters.
Millimeters – Enters or converts to millimeters.
Gallons – Enters or converts to gallons.
Liters – Enters or converts to liters.
UG4095E-A.indd 6
5/5/2009 9:09:28 AM