Calculated Industries 4095-A User Guide - Manual (Page 40)

38 — P
iPe
T
rades
P
ro
™
(Volume displays) VOL Std.

VOL 0. CU FEET

VOL 0. CU M

(repeats options) VOL Std.
Fourth press of  :
(Meter Linear displays) METR 0.000 M

(floating point) METR FLOAt M

(repeats options) METR 0.000 M
Fifth press of  :
(Decimal Degree displays) DEG 0.00º

(floating point) DEG FLOAt

(repeats options) DEG 0.00º
Sixth press of  :
(Fractional mode) FRAC Std.

FRAC COnSt.

(repeats options) FRAC Std.
Seventh press of  :
(Mathematical Operation) MATH OrdEr

MATH CHA1n

(repeats options) MATH OrdEr
aPPEndix d –
Constants
For material surface roughness, we use the following:
Material
PVC
Copper
Steel (low carbon)
Stainless Steel (austenitic)
Brass
Aluminum
Cast Iron
15.6
4.9
221
49.2
4.9
4.9
850
e (x 10 -6 ft)
Roughness Factor
UG4095E-A.indd 38 5/5/2009 9:09:35 AM