Brother MFC-730 User Manual
Page 96

84
C H A P T E R T E N
Change Fax Forwarding Setting
Press
9
5
then to
Turn Fax Forwarding OFF––Press
1
.
Turn Fax Forwarding ON––Press
2
.
Program Fax Forward Number––Press
4
. The MFC 730 will
automatically turn on Fax Forwarding ON.
Turn Fax Storage ON––Press
6
.
Turn Fax Storage OFF––Press
7
. (This is only possible if there are no
faxes stored in the memory, or if all faxes have been erased using
Remote Control
9 6 3
).
Retrieve a Fax
Press
9
6
then to
Print a Memory Status List––Press
1
, then enter the number of remote
fax machine and then press
# #
, After the beep, hang up and wait.
Retrieve all faxes––Press
2
, then enter the number of remote fax
machine and then press
# #
, After the beep, hang up and wait.
Erase all fax messages––Press
3
. If the data stored in the memory has
not been printed before, it will be printed first and then erased.
Check the Receiving Status
Press
9
7
then for
Fax messages––Press
1
.
1 long beep––Received messages.
3 short beeps––No messages.
Change Answer Mode
Press
9
8
then for
TAD––Press
1
.
Fax/Tel (F/T)––Press
2
.
Fax––Press
3
.
Exit Remote Operation
Press
9
0