Brother MFC-730 - Manual (Page 114)

102
C H A P T E R T W E L V E
3 Press Set .
4 Press Record , then pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a fax,
please press 51, wait for the fax tones, then press the start button
on your machine.
5 Replace the handset. The Message Manager plays your OGM.
6 Press Stop to exit.
Listening to the Outgoing Message (OGM)
1 Press Menu , 1 , 8 , 3 .
2 Press or to select TAD MESSAGE (or F/T MESSAGE or
PAGING MSG.).
3 Press Set when the screen displays your selection.
4 Press Play to hear the OGM. Adjust volume by pressing Volume
or .
5 Press Stop to exit.
Erasing the Outgoing Message (OGM)
1 Press Menu , 1 , 8 , 3 .
2 Press or to select TAD MESSAGE (or F/T MESSAGE or
PAGING MSG.).
3 Press Set when the screen displays your selection.
4 Press Erase .
5 Press 1 to erase the OGM —OR— Press 2 to exit without erasing.
6 Press Stop to exit.
Activating Message Manager Mode
To activate Message Manager.....
Press Mode until both FAX and F/T lights are on.
...You can easily identify the Message Manager mode that is activated by
viewing the Message Manager indicator lights.
TAD
FAX
F/T
See
“Record
Fax/Tel
Outgoing
Announcement”
chap. 6