Brother MFC-730 - Manual (Page 44)

32
C H A P T E R F O U R
4. REMAINING JOBS
Function Description Factory Set Chapter
Check which jobs are in 7
memory or cancel a delayed fax
(timer) or polling job.
5. INTERRUPT
Function Description Factory Set Chapter
Send a fax now, even if you 7
have the MFC set to send a fax
later, or if you have it set for
Polling.
6. SET QUICK-DIAL
Function Description Factory Set Chapter
1. ONE-TOUCH DIAL Dial numbers stored in memory -- 8
by pressing only one key.
2. SPEED-DIAL Dial numbers stored in memory -- 8
by pressing only three keys.
3. SETUP GROUPS Set up a Group number for -- 8
broadcasting.
7. PRINT REPORTS
Function Description Factory Set Chapter
1. XMIT REPORT Print confirmation of OFF 15
transmission after each
document is sent.
2. JOURNAL Lists information about the last JOURNAL:OFF 15
50 incoming and outgoing
faxes.
3. QUICK-DIAL Lists names and numbers stored -- 15
in One Touch and Speed Dial
memory (in numerical order).
4. TEL. INDEX Alphabetical lists of stored
numbers.
5. SYSTEM SETUP Lists various system settings. -- 15
6. MEMORY STATUS Lists information about -- 15
memory use.
1. Fax Functions (continued)