Brother MFC-730 - Manual (Page 72)

60
C H A P T E R S E V E N
■ Make sure documents written with ink are completely dry.
■ To set different resolutions for each page of a multi page document,
refer to “Multiple Resolution Transmission”.
Resolution
When you have a document in the feeder, you can use the Resolution
key. Press Resolution continuously until you see the LEDs change.
Resolution
Fine
Photo
S.Fine
Standard Suitable for most typed documents. ( Fine and S.Fine
lights are off)
Fine Good for small print; transmits a little slower than
Standard resolution. (Only the
Fine light is ON)
Super Fine Good for very small print or artwork; transmits slower
than Fine resolution. (Only the
S.Fine light is ON)
Photo Use when document has varying shades of grey; slow
transmission time. (Both
Fine and S.Fine lights are ON)
Contrast
If your document is very light or very dark, you might want to set the
contrast accordingly. Use LIGHT to send a light document. Use DARK
to send a dark document.
1 Insert the document, face down, in the feeder.
2 Press Menu , 1 , 3 , 3 .
3 Use or to select AUTO, LIGHT, or DARK.
4 When the screen displays your selection, press Set .
5 Press 2 if you are finished choosing settings, and go to Step 6 ––
OR–– Press 1 if you want to select additional settings. The display
returns to the SETUP SEND menu.
6 Enter a fax number and press Start to send a fax.
See
“Multiple
Resolution
Transmission”
in this
chapter