Brother MFC-730 User Manual

Page 198

186

C H A P T E R

T W E N T Y

Hold the ink cartridge as shown in the illustration, and remove the

sealing tape from the side of the ink cartridge. Carefully peel the

tape in the direction away from you..

opening

IMPORTANT: To prevent spilling ink and staining your hands and
clothing, remove the sealing tape gently.

Each colour has its own correct position. Insert each new ink
cartridge into the carriage using the colour indicator on the print head
as a guide.

Please be careful not to push down the switch bar.

Close the cartridge cover until it clicks into place.

After installing the ink cartridges, close the top cover. Your MFC
prepares for a “head cleaning” and goes online. The display screen
prompts you to verify a new ink cartridge was inserted for each color
you removed. Example: DID YOU CHANGE BLCK 1. YES 2.
NO.

If the ink cartridge you installed is not a brand new one, please make
sure to select 2.

For each new cartridge, press

on the keypad to reset the ink dot

counter for that colour automatically. (The ink dot counter enables
the MFC to notify you when a colour is running low.)

The MFC will enter a cleaning cycle for approximately two minutes
for each replaced cartridge. The display screen alternately shows
CLEANING and PLEASE WAIT.