Brother MFC-730 - Manual (Page 153)

141
S E T T I N G U P T H E M F C A N D C O M P U T E R T O W O R K T O G E T H E R
Installing Brother Drivers for your
MFC-740 in Windows
®
Brother Drivers
The following software is provided to optimize the use of your MFC.
The software can run in Windows
® 3.1, 3.11, 95, 98 and NT ® Workstation
Version 4.0.
■ Printer Driver*- The Printer driver creates the print data from
applications, controls transmission and makes
settings for printing. It is necessary to install the
MFC-740 printer driver into your PC for printing.
■ Scanner Driver*- The MFC-740 scanner driver is TWAIN compliant.
You can use the scanner directly from TWAIN
compliant applications. In the scanner driver, you
can make settings for scanning.
■ Maintenance Utility for DOS-
This is utility software running in MS-DOS. If you
are not using Windows, you can use the MFC’s
ESC/P emulation to print. Some settings which are
unique to the MFC and maintenance operations can
be done from this utility.
■ MFL Pro Software-
This software allows you to send and receive faxes
with your PC, please refer to MFL-PRO Manual for
further information. The Brother Resource Manager
must be installed to use this software.
* These drivers are supplied within the Brother Resource Manager.