Brandmotion 2000-3811 - Manual (Page 19)

Section 7: Toyota Camry, 2010 – Current
2000-3811 Instructions 8-1-13.Doc Page 19 of 54
9. Use a Philips head screwdriver to remove 2 lower
glove box screws.
10. Remove lower glove box slowly and carefully to
avoid damage to attached wires.
11. Disconnect accessory plug from back of lower glove
box.
12. Use a Plastic Trim Removal Tool to remove vent
panel. Remove lower glove box slowly and detach
connector from back.
13. Use a 10mm socket to remove 2 bolts located below
radio/climate control assembly.
14. Use a 10mm socket to remove 2 bolts located above
radio/climate control assembly.