Brandmotion 9002-7630 - Manual (Page 4)

INSTALLATION
INSTRUCTIONS
7630 Instructions 1-16-13.doc Page 4 of 4
Step 17: Test system. Close trunk or liftgate and
clear all removed items from around the vehicle
before starting the vehicle. Next, shift into Reverse
and check radio display for the camera image.
Step 18: Adjust camera aim. Use the supplied
Allen Wrench to loosen the camera mount bolt. Tilt
camera to the desired viewing angle and retighten
the bolt.
Step 19: Reassemble vehicle. Follow your
disassembly steps in reverse order, taking care not
to bind the harness wiring when reinstalling trim.
CAMERA
OPERATION
The camera offers grid lines or non grid
lines and mirror image or non mirror image
options.
Grid line options: Default setting displays grid
lines. To remove the grid line display, connect
the two green wires near the end of the
Camera Harness.
Display options: Default setting is mirror
image display (i.e., words and letters appear
backwards as in a mirror) for rearward facing
camera (rear view) installation. To change to
non mirror image display for forward
facing camera (front view) connect the two
white wires near the end of the Camera
Harness.
Green and white wires on the Camera Harness.