Bowers Group Trimos Mestra Height Gauges - Manual (Page 20)

750 50 0001 03
20/28
Page 2
5. Date:
y: year (4 numbers).
m: month
d: day
6. Time:
h: hours
min: minutes
s: seconds
7. Contrast / luminous power:
Move the indication cursor using the key 4 or 6 to change
the contrast / luminous power of the screen.
8. Adjustment of the air cushion (instrument displacement):
The pressure of the air cushion can be adjusted according
to the quality of the measuring plate. Move the indication
cursor using the keys 4 or 6.
9. Adjustment of operating standby mode:
Activation and setting of the period of time for the standby
mode.
If the instrument is not in use during the entered period of
time, it passes into standby mode (display unit turned off)
and the energy consumption is reduced to a minimum.
This status is confirmed by a red LED. The instrument will
start as soon as a movement is detected or a key is
touched. The memory of the buffer will be maintained. If
the entered value is equal to 0, the mode will be
cancelled.
10. Adjustment of the switch Off period:
Activation and setting of the period of time before
instrument switches Off completely. Enter the period of
time.
After switching completely Off and On again, the memory
of the buffer will be cleared but all parameter settings are
maintained. If the entered value is equal to 0, the mode
will be cancelled.
Page 3
Programming of the operating handle mode keys:
11. Functions of the yellow key:
Three possible functions: - Preset
-
Zero
- Ref
12. Functions of the blue key:
Three possible functions: - Surfaces / Diameters
- Min / Max / Delta
- Surfaces / Min / Max
7
8
9
10
6
5
11
12