Bowers Group Sylvac Z Cal Height Gauges - Manual (Page 13)

13
15. ACCESSORIES
Item No.
- Set No. 1 with special probes in a wooden case comprising : 930.2151
- 1 probe with saphire ball ,
∅
2 mm
- 1 probe,
∅
1 mm / M1.4 and tightening spanner
- 1 probe with bevelled anvil in hard metal
- 1 probe with rounded anvil
∅
3 x 5 mm to measure threads
Note : all these probes weigh 7 grams and therefore require no rebalancing of the measuring
force.
- Set No. 2 with special probes in a wooden case comprising : 930.2150
- in addition to the above set nr 930.2151 :
- 1 holder, length 80 mm with M2.5 end bit at 90°, weight 9 grams.
- 1 holder, length 80 mm with
∅
4 mm nipple, at 90°, weight 9 grams.
- 1 extended holder, length 124 mm M2.5, weight 12 grams.
- 1 extended holder, length 80 mm M2.5, weight 7 grams.
- 1 ball probe
∅
2 / M2.5
- 2 ‘’parasol’’ key
- 1 key with slewable saphire ball, weight 4 grams.
- 1 foot key
- 1 Imbus spanner 1.5 mm
- 1 Imbus spanner 2.5 mm
- Set No. 3 with probe holders in a wooden case comprising : 930.2140
- 1 short horizontal holder
- 1 long horizontal holder
- 1 short vertical holder
- 1 long vertical holder
- 1 stand for holders
- Fixed tungsten carbide probe, with saphire ball
∅
3 mm 930.2146
- Master gauge for measuring the constant 930.2001
- Connection cable for PC 9M-9F 3m 925.5609
- SP1 printer with statistics 926.1807
- D100S statistics processing unit 804.1101
- SYLWIN Windows program (3 1/2 ‘’ diskette) 981.7131
- Spare battery pack 930.2170
- Z_CAL 150 protective cover 930.0151
- Z_CAL 300 protective cover 930.0301
- Imbus spanner, 2.5 mm for clamping the probe 930.2160
Modifications reserved