Bowers Group UniCal Universal Digital Caliper - Manual (Page 49)

Contents
I Instruction for use for Caliper 51
I.1 Description of instrument 51
I.2 Measuring 51
II LCD display 52
II.1 Description of LCD 52
III. Button functions 53
III.1 How to use buttons 53
III.2 Description 53
III.3 Changing modes 53
III.3 Changing modes 54
III.4 Function selection and activation 54
III.5 Combined use of [mode] and [set] buttons 54
IV How to operate the instrument 54
IV.1 Switch on 54
IV.2 Switch off 55
IV.3 Battery replacement 55
V. Description of use 55
V.1 Measuring modes 55
V.1.1 Selection of unit of measurement 55
V.1.2 Return to zero (recall the preset) 56
V.2 Reference mode 56
V.2.1 Selection of the reference 56
V.2.2 Hold the measure 56
V.3 Introduction of preset 57
V.3.1 Selection of the digit to be modified57
V.3.2 Changing the value 57
V.3.3 Changing the sign 58
V.3.4 Save the Preset value 58
V.3.5 Recommended use 58
V.4 Minmax mode 58
V.4.1 Selection of minmax mode 58
V.4.2. Selection of the functions MIN, MAX and |MIN-MAX| 59
V.4.3 Resetting the MIN and MAX memory59
V.5 Tolerance mode 59
V.5.1 Introduction of tolerance values 59
V.5.1.1 Introduction of the upper limit 59
V.5.1.2 Introduction of the lower limit 60
V.5.1.3 Return to tolerance mode 60
V.5.2 Instruments with tolerance indications (diodes) 60
V.5.2.1 How the LED are working 60
V.5.2.2 Instruments with tolerance indications (diodes) 61
V.5.3 Hold 61
VI. Special functions 61
E