Brother ULT 2003D User Manual
Page 99
3-26
Sewing Utility Stitches
5
1
5. Slowly lower the presser foot lever, and then position
the pin on the presser foot (side cutter) in the notch of
the presser foot holder to attach the presser foot (side
cutter).
6. Select a stitch pattern.
If there is an “S” in the bottom of the key display, the
indicated stitch pattern can be sewn with the side cut-
ter.
Normal sewing
Zigzag stitch
Overcasting stitch for light and medium weight fab-
rics
Overcasting stitch for heavyweight fabrics
Overcasting stitch for medium and heavyweight stretch
fabrics
7. Make a cut of about 20 mm (3/4 inch) in the fabric.
1
20 mm (3/4 inch)
See also other documents in the category Brother Sewing machines:
- XL 2600i (82 pages)
- PE-770 (88 pages)
- PE-770 (40 pages)
- PE-770 (2 pages)
- SE-400 (16 pages)
- LS-2125i (2 pages)
- LS-2125i (67 pages)
- CS-6000i (68 pages)
- CS-6000i (2 pages)
- CE-5000PRW (68 pages)
- LX-3125 (96 pages)
- SE-400 (24 pages)
- 3034D (76 pages)
- 3034D (2 pages)
- HE 120 (183 pages)
- Innov-IS 500D (12 pages)
- CS-8060 (116 pages)
- CS 80 (115 pages)
- NX-400 (153 pages)
- PC-420 (153 pages)
- NX-200 (111 pages)
- PC-210 210PRW (2 pages)
- PC-210 210PRW (111 pages)
- Innov-IS 4000D (8 pages)
- Boutique 27 37 (111 pages)
- 2340CV (21 pages)
- 2340CV (40 pages)
- DS-120 (100 pages)
- PE-700II 750DUSB (40 pages)
- Innov-is 2200 (48 pages)
- NX-2000 (40 pages)
- NX-2000 (88 pages)
- NX-2000 (2 pages)
- 885-X08 (104 pages)
- PR-600 600C (20 pages)
- INNOVIS 500 (8 pages)
- PS-21 (46 pages)
- PC 6500 (140 pages)
- PE-750D (40 pages)
- XL-6061 (101 pages)
- XL-5051 (45 pages)
- BAS-326F-0 (81 pages)
- CS 100T (67 pages)
- EX 660 (67 pages)
- XL-5010 5020 5030 (82 pages)