Darning -57 – Brother ULT 2003D User Manual

Page 130

Sewing Utility Stitches

3-57

1 —

Darning

Use this stitch pattern for mending and other applications.

1. Select a stitch pattern.

For medium weight fabrics

For heavyweight fabrics

2. Attach buttonhole foot “A” and set the scale to the de-

sired length of the darning.

Note
The maximum length of darning is 30 mm (1-3/16 inch).

Presser foot scale

Completed measurement

Width 7 mm (1/4 inch)

5 mm (3/16 inch)

3. Check that the needle drops at the desired position and

lower the presser foot lever, making sure the upper
thread passes underneath the buttonhole foot.

CAUTION
• Set the presser foot so that there is no gap behind

the section marked with an “A” (in the shaded area
in the illustration to the right). If there is
a gap, the size of the darning will not be
correct.

• Pass the thread underneath the presser

foot.