Overcasting -23, Overcasting using presser foot “g” 3-23, Caution – Brother ULT 2003D User Manual

Page 96

Sewing Utility Stitches

3-23

Overcasting

Use for the beginning and end of seams in skirts or trousers, and the beginning and end of all
cuttings. Use presser foot “G”, presser foot “J”, or the side cutter attachment depending on the
kind of overcasting stitch you select.

■ Overcasting Using Presser Foot “G”

1. Select a stitch pattern.

For sewing light and medium weight fabrics

For sewing heavyweight fabrics

For sewing medium or heavyweight and easily-fraya-
ble fabric

2. Attach presser foot “G”. Lower the presser foot so that

the presser foot guide is exactly against the edge of the
fabric.

3. Sew along the presser foot guide.

Guide

CAUTION

After the stitch width is adjusted, turn the bal-
ance wheel toward you by hand and check that
the needle does not touch the presser foot. If the
needle hits the presser foot the needle may
break and cause injury.

The needle should not touch