Supplemental spool pin -6, Flat bed attachment/free arm -6, Feed dog position switch -6 – Brother ULT 2003D User Manual

Page 17: Presser foot dial -6, P.1-6), P.1-6, 1-8)

1-6

Setting Up

■ Feed Dog Position Switch

Use this switch when attaching buttons (see page 3-61) or
for other similar projects. Remove the flat bed attachment
and raise the presser foot lever to operate the feed dog
position switch. Set the lever in the

position for nor-

mal sewing

Feed dog position switch

..... The feed dogs are up and will help guide

the fabric.

..... The feed dogs are down and will not help

guide the fabric.

■ Presser Foot Dial

Turn the presser foot dial in order to adjust the pressure
applied by the presser foot. The higher the number, the
stronger the pressure will be. The presser foot dial has set-
tings from 1 (weakest) to 4 (strongest). Use setting “3” for
normal sewing. Lower the presser foot lever before turn-
ing the presser foot dial. If you adjust the setting, be sure
to return it to “3” after sewing.

Weak

Strong

■ Supplemental Spool Pin

Use this spool pin to wind the bobbin thread during sew-
ing, or when sewing with the twin needle (see pages 1-29,
2-5).

■ Flat Bed Attachment/Free Arm

Use the free arm sewing option to attach cuffs, hem pant
legs, and sew other tubular pieces. Pull the flat bed at-
tachment to the left to remove it and create the conven-
ient free arm sewing mode.