■ Attaching the Walking Foot
The walking foot holds the fabric between the presser foot and the upper and lower feed dogs to
feed the fabric, this enables you to have better fabric control when sewing difficult fabrics (such as
vinyl cloth, leather, or synthetic leather) or fabrics that slip easily (such as quilting or velvet).

* The walking foot can only be used with straight or zigzag stitch patterns. Reverse stitches can

not be sewn with the walking foot. Only select straight or zigzag stitch patterns with reinforce-
ment stitches.

* To use the walking foot, you need the low shank adapter and the screw (large) for the walking

foot.

1. Press the “Needle Position” button to set the needle in

the up position, and then turn off the main power
switch.

2. Raise the presser foot lever.

3. Push the black button on the presser foot holder and

remove the presser foot.
1

Presser foot holder

4. Loosen the screw of the presser foot holder to remove

the presser foot holder.