Brother ULT 2003D User Manual

Page 133

background image

3-60

Sewing Utility Stitches

6

5

6

5

6

1

1

2

1

4. Check the first needle drop point and lower the presser

foot.
1

2 mm (1/16 inch)

5. Lower the buttonhole lever so that it is positioned be-

hind the metal bracket on the buttonhole foot.
1

Metal bracket

6. Gently hold the end of the upper thread and begin sew-

ing. When sewing is completed, the machine will sew
reinforcement stitches and stop automatically.

Bar Tacks on Thick Fabrics
Place a piece of folded fabric or cardboard beside the fab-
ric being sewn to level off the buttonhole foot and allow
for easier feeding.

Note
If automatic thread cutting is turned on before you start
sewing, both threads are automatically cut after the rein-
forcement stitches are sewn. If the fabric does not feed
(for example, because it is too thick), increase the stitch
length setting.

1

Presser foot

2

Thick paper