Autocue SSP10 Quick Start - Manual (Page 7)

Getting started
- Prepare and connect the prompting hardware
SSP-QStartUserManual.docx 2011-06-15
7 © 2003-2011 Autocue Group Ltd.
10. Screw in the appropriate length pillars that raise the plate to the required height for
your camera.
11. Adjust the position of the pillars to align with the screw holes of the camera
mounting plate.
12. Re-attach camera mounting plate
 if the camera is to be at the lowest level use the four thumbscrews
 if the camera is to be in one of the raised positions, use the countersunk screws
to attach the plate to the tops of the mounting plate pillars