Autocue SSP10 Quick Start - Manual (Page 25)

Use your prompter in different situations
SSP-QStartUserManual.docx 2011-06-15
25 © 2003-2011 Autocue Group Ltd.
2. Remove the thumb screws
3. Carefully take the frame off
4. Change the monitor mounting plate
1. Remove the monitor
2. Lay the monitor face down on a smooth, flat surface
3. Remove the four screws securing the standard mounting plate to the back of the
monitor
4. Remove the standard mounting plate
5. Align the supplied wide mounting plate over the correct holes on the rear of the
monitor
6. Securely attach the wide mounting plate
Use the four procedures outlined above
1. Remove the hood and mirrored glass
2. Remove the monitor
3. Remove the vertical frame
4. Change the monitor mounting plate