Autocue SSP10 Quick Start - Manual (Page 4)

Getting started
- Prepare and connect the prompting hardware
SSP-QStartUserManual.docx 2011-06-15
4 © 2003-2011 Autocue Group Ltd.
Getting started
This section is designed to get your Starter Series Prompter setup as quickly as possible so that you can start
writing and prompting your scripts.
Prepare and connect the prompting hardware
It is strongly recommended that you view the demonstration video showing the preparation of an Autocue
starter series prompter. Click “Play Demonstration Video” on the main menu of the installation CD.
You can also view the video on the Autocue web site: http://www.Autocue.com/autocueppvid
1. Remove the unit from the shipping box.
Check that the following items have been received:
a. Starter Series Prompter (SSP)
b. 2 x camera securing screws
c. 4 x long camera plate support pillars (with countersunk screws
attached)
d. 4 x short camera plate support pillars
e. Wide monitor mounting plate
f. Software CD
g. USB hardware licence dongle
h. 10 m VGA cable
i. Power cord and DC adaptor
Attach to tripod
2. Remove the camera mounting plate from your tripod. (Refer to the manufacturer’s
manual if you have difficulty doing this.)
a
h c e
d b
f
g
i