Rockwell Automation 57C332 AutoMax Power Supply Module and Racks - Manual (Page 7)

1Ć1
1.0 INTRODUCTION
The products described in this instruction manual are manufactured
by Reliance Electric Industrial Company.
The Power Supply module (M/N 57C493 or M/NĂ57C494) converts
115 VAC input power into the DC voltages necessary to operate the
other modules contained in the Rack. The Rack provides the
mechanical means of mounting 6 (M/N 57C334), 10 (M/NĂ57C332),
or 16 (M/NĂ57C331) DCS5000 or AutoMax modules, as well as the
Power Supply module. The Multibust backplane in the Rack
provides two sets of bus lines for local communication among the
DCS5000 and AutoMax modules.
The M/N 57C393 Power Supply module can provide a maximum
continuous output of 376 watts to power modules in the AutoMax
rack. The M/N 57C394 Power Supply module can provide a
maximum continuous output of 147 watts to power modules in the
AutoMax rack. When using the M/N 57C494 Power Supply module in
a 10 or 16Ćslot rack, make certain that the power requirements of the
modules in the rack do not exceed the capacity of the Power Supply
module. See Appendix E for a list of AutoMaxĆcompatible modules
and their power requirements.
This instruction manual describes the functions and specifications of
the Power Supply modules and the Rack. It also includes a detailed
overview of installation and servicing procedures.
1.1 Additional Information
You should be familiar with the instruction manuals which describe
your system configuration. This may include, but is not limited to, the
following:
D JĆ3636 COMMON MEMORY MODULE INSTRUCTION MANUAL
D JĆ3649 AutoMax CONFIGURATION TASK MANUAL
D JĆ3630 ReSource AutoMax PROGRAMMING EXECUTIVE
INSTRUCTION MANUAL VERSION 1.0
D JĆ3650 AutoMax PROCESSOR MODULE INSTRUCTION
MANUAL
D JĆ3668 DCS5000 POCKET REFERENCE
D JĆ3669 AutoMax POCKET REFERENCE
D JĆ3675 AutoMax ENHANCED BASIC LANGUAGE
INSTRUCTION MANUAL
D JĆ3676 AutoMax CONTROL BLOCK LANGUAGE INSTRUCTION
MANUAL
D JĆ3677 AutoMax LADDER LOGIC LANGUAGE INSTRUCTION
MANUAL
D IEEE 518 GUIDE FOR THE INSTALLATION OF ELECTRICAL
EQUIPMENT TO MINIMIZE ELECTRICAL NOISE
INPUTSTO CONTROLLERS
D IEEE 796 STANDARD MICROCOMPUTER SYSTEM BUS
D Your ReSource AutoMax PROGRAMMING EXECUTIVE
INSTRUCTION MANUAL