Rockwell Automation 57C332 AutoMax Power Supply Module and Racks - Manual (Page 2)

DANGER
ONLYQUALIFIED ELECTRICAL PERSONNEL FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THIS EQUIPMENT AND THE HAZARDS
INVOLVED SHOULD INSTALL, ADJUST, OPERATE, OR SERVICE THIS
EQUIPMENT. READ AND UNDERSTAND THIS MANUAL AND OTHER
APPLICABLE MANUALS IN THEIR ENTIRETYBEFORE PROCEEDING. FAILURE
TO OBSERVE THIS PRECAUTION COULD RESULT IN SEVERE BODILYINJURY
OR LOSS OF LIFE.
DANGER
THE USER IS RESPONSIBLE FOR CONFORMING WITH ALL APPLICABLE
LOCAL, NATIONAL, AND INTERNATIONAL CODES. WIRING PRACTICES,
GROUNDING, DISCONNECTS, AND OVERĆCURRENT PROTECTION ARE OF
PARTICULAR IMPORTANCE. FAILURE TO OBSERVE THIS PRECAUTION
COULD RESULT IN SEVERE BODILYINJURYOR LOSS OF LIFE.
WARNING
INSERTING OR REMOVING THE POWER SUPPLYMODULE OR ITS
CONNECTING CABLES MAYRESULT IN UNEXPECTED MACHINE MOTION.
POWER TO THE MODULE SHOULD BE TURNED OFF BEFORE INSERTING OR
REMOVING THE MODULE OR ITS CONNECTING CABLES. FAILURE TO
OBSERVE THIS PRECAUTION COULD RESULT IN BODILYINJURY.
WARNING
THE USER MUST PROVIDE AN EXTERNAL, HARDWIRED EMERGENCYSTOP
CIRCUIT OUTSIDE THE PROGRAMMABLE CONTROLLER CIRCUITRY. THIS
CIRCUIT MUST DISABLE THE SYSTEM IN CASE OF IMPROPER OPERATION.
UNCONTROLLED MACHINE OPERATION MAYRESULT IF THIS PROCEDURE IS
NOT FOLLOWED. FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN
BODILYINJURY.
CAUTION: The power supply module and racks contain staticĆsensitive components.
Careless handling can cause severe damage. Do not touch the connectors on the back
of the power supply module or the racks. When not in use, the power supply module
should be stored in an antiĆstatic bag. The plastic cover should not be removed. Failure
to observe this precaution could result in damage to or destruction of equipment.
Allen-Bradley and Rockwell Automation are trademarks of Rockwell Automation, Inc,.
Trademarks not belonging to Rockwell Automation are property of their respective companies.