Rockwell Automation 2707-MVH232_MVP232 MicroView Operator Interface Module - Manual (Page 12)

Publication 2707-UM005B-EN-P
2-4 Microview Overview
Function Key Operations
Function keys can be linked to application screens allowing quick
access to critical data display or data entry screens. For example, if
the F1 function key is linked to Recipe Screen 10, the operator can
press F1 at any point in the application to download recipe registers
on screen 10 to the processor. A control mode can be assigned to
each function key linked to a screen.
Sends data to the controller. Data can either be default values
or data entered at the keyboard.
Enters numbers 0 to 9 during data entry or selects a numbered
item shown on the display.
Displays any application screen assigned to the key. These
keys can also set or clear bits at two consecutive registers in
the controller data table.
Control Mode Function
Auto Return Returns to the screen displayed before the function key was
pressed.
Continue Continues to the next screen in the link regardless of the
screen displayed before the function key was pressed.
Bit Write Mode Allows the function key when pressed to set or clear a bit in
the controller. Bit Write Mode operates with either Auto
Return or Continue mode.
The function keys access 2 contiguous word data elements
defined by the user. For example, assign function keys F1 to
F2 to N7:20 and N7:21.
Key Function
0 9
F1 F2