Fault reset (rst), Monitor variable (mdm), Fault reset (rst) -3 monitor variable (mdm) -3 – Rockwell Automation 2092-DAx Ultra1500 Host Commands for Serial Communication Reference Manual User Manual

Page 15: Fault reset (rst) monitor variable (mdm)

Publication 2092-RM001A-EN-P — March 2005

Command Reference

2-3

Fault Reset (RST)

Monitor Variable (MDM)

Command:

RST

Description:

Clear fault

Format:

STX ID # RST : BSS ETX

Response:

ACK

Usage Note:

Fault Reset will have no effect if action was not taken to resolve the
problem causing the fault.

Command:

MDM

Description:

Monitor variables

Format:

STX ID # MDM P1 P2 P3 P4 P5 : BSS ETX

Data:

Argument

Description

P1-P5

Variables to monitor.
Refer to Monitor Variables on page A-3 for the
list of variables.

Usage Note:

MDM command can monitor up to 5 variables. See Appendix A for
the list of variables.

Response Format: STX ID $ MDM V1&V2&V3&V4&V5 : BSS ETX

Response Data:

Argument

Description

V1 to V5

Variable values are 4 or 8 bytes signed