Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal - Manual (Page 8)

Publication 2727-UM002D-EN-P
Preface 2
Terminology The MobileView Guard G750 is referred to as the MobileView terminal
throughout this manual.
Intended Audience This manual is for the individuals responsible for installing,
configuring, troubleshooting, and operating the MobileView Guard
G750 in an industrial environment.
Intended Uses The MobileView Guard G750 may only be used for the types of use
described in this manual. This terminal has been developed,
manufactured, tested and documented in accordance with ergonomic
guidelines and the appropriate safety standards. If you follow the
instructions and safety precautions relating to the intended use are
properly observed, the MobileView Guard G750 does not, under
normal circumstances, represent a danger to the health of personnel
or a risk of damage to other property or equipment.
Observe national regulations for disposing of electronic components.
European Communities (EC)
Directive Compliance The product has the CE mark and is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives. In addition, the device meets the
Council Directive 98/37/EC as a safety component.
8 Maintenance and
Troubleshooting Provides information on cleaning, handling
and troubleshooting the MobileView
Guard G750 terminal.
A Specifications Gives specifications for the MobileView
Guard G750 terminal.
B Available Fonts for Terminal
Applications Provides information on pre-installed fonts
and available fonts for download for the
MobileView terminals.
Chapter Title Description