Rockwell Automation 2705 REDIPANEL KEYPAD MODULE USER MANUAL - Manual (Page 89)

A–B
Index
I–1
A
Address, Rack, 5-1, 5-2
Applicable PLCs and Scanners, 4-2
Applications, Keypad Module, 2-2
Architecture, Remote I/O, 4-2
ASCII Data, 2-3, 6-2
ASCII Message Display, 6-2
B
BAD MSG NUMBER, A–2
Basic Troubleshooting, 8–3
Baud Rate, 3–5, 5–4
BCD, Datatype, 2–4, 5–4
Binary, Datatype, 2–4, 5–4
Bulletin 2705 RediPANEl Keypad
Modules, 2–1
C
Calculating Rack Size, 4–7
COMM (Communications)
Blinking, 8–2
Indicator, 8–2
OFF, 8–2
ON, 8–2
COMM SETUP ERR, A–1
COMM START ERROR, A–1
COMM 1 Fault, 8–1
Commands, Editing, 6–8
Communication Faults, 8–1
Communications, 4–1
Compatible PLCs and Scanners., 4–5
Configuring Keypad Module, 4–1
Appropriate Scanner, 4–1
Calculating Rack Size, 4–7
Number of Chassis and Amount
of I/O, 4–8
Configuration, Remote I/O, 4–8
Connecting to a Remote I/O Link,
3–5
Cable Length, 3–5
Cable Type, 3–5
Connecting to a Scanner Module,
3–6
Cable Type, 3–6
Wiring Connections, 3–6
D
Data Entry, 6–3
Decimal Modes, 6–4
Destination Entry, 6–4
Polarity (minus sign), 6–4
Split Display, 6–4
Data Type, 2–4, 5–4
BCD, 2–4, 5–4
Binary, 2–4, 5–4
Integer, 2–4, 5–4
DATA TYPE ERROR, A–1
Datatype, 5–4
DC (Decimal Point Control), 7–26
Dec. Pos. (Decimal Position), 7–26
Decimal Point Control, 7–26
DC (Decimal Point Control),
7–26
Dec. Pos. (Decimal Position),
7–26
SDP (Scratched Decimal
Position), 7–26
Decimal Point Key, 2–3
DELETE Key, 6–5
Destination Bits, 5–4
Destination Entry, 6–4
DELETE Key, 2–3, 6–5
ENTER Key, 2–3, 6–5
Minus Key, 2–3, 6–5
Destination Function, Using the, 7–9
DIP Switches, 5–1
Switch Bank #1, 5–2
Switch Bank #2, 5–4
Switch Bank #3, 5–5
Display Characters, A–3
Display, Keypad, 6–1
Display Message, 7–25
Display Stored Message, 2–4, 6–2
Displaying a Full Line Stored
Message, 7–6
Displaying Numeric Data, 7–4
E
Editing Commands, 6–8
Editing Messages, 6–7
Editor, Message, 6–6
EEPROM CRC ERROR, A–2
EEPROM, Storing Messages on, 6–5
Electrical Precautions, 3–1
Electromagnetic Interference, 3–1,
3–2
Emergency Stop Switches, 3–1
Enclosures, NEMA, 3–1
ENTER Key, 6–5