Rockwell Automation 1794-ASB/E Remote I/O Adapter Module User Manual - Manual (Page 58)

Specifications A–2
Publication 1794ĆĆUM009D-EN-P - April 2004
1794ĆASB Series E Specifications
Surge Transient Immunity IEC 61000-4-5
+1kV line-line (DM) and +2kV line-earth (CM) on signal ports
Conducted RF Immunity IEC 61000-4-6
10V rms with 1kHz sine wave 80% AM from 150kHz to 80MHz
Emissions CISPR 11
Group 1, Class A (with appropriate enclosure)
Enclosure Type Rating None (open-style)
Remote I/O Cable Belden 9463 or equivalent as specified in publication ICCGĆ2.2
Remote I/O Connector Plug Part Number 942029-03
Power Conductors
Wire Size
Category
12 gauge (4mm 2 ) maximum sokid or stranded wire rated at 75 o C or greater
3/64 inch (1.2mm) insulation max.
2 1
Agency Certification
(when product is marked)
ULUL L isted Industrial Control Equipment
UL UL Listed for Class I, Division 2 Group A, B, C and D Hazardous Locations
CSA CSA Certified Process Control Equipment for Class I, Division 2 Group A, B,
C, D Hazardous Locations
EEx 2 European Union 94/9/EEC ATEX Directive, compliant with
EN 50021; Potentially Explosive Atmospheres, Protection n"
CE 2 European Union 89/336/EEC EMC Directive, compliant with:
EN 50081-2, Industrial Emissions
EN 50082-2, Industrial Immunity
EN 61326, Meas./Control/Lab., Industrial Requirements
EN 61000-6-2, Industrial Immunity
C-Tick 2 Australian Radiocommunications Act,compliant with:
AS/NZS 2064, Industrial Emissions
Publications Installation Instructions 1794-IN046
1 Use this conductor category information for planning conductor routing. Refer to publication
1770Ć4.1, Industrial Automation Wiring and Grounding Guidelines."
2 See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates and
other certification details