Select a communication module – Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual User Manual

Page 34

Publication 1734-UM008B-EN-P - August 2005

4-4 Configure the Adapter

Select a Communication Module

1. Click on I/O Configuration on the left side of the dialog to

highlight it.

2. Right-click on I/O Configuration and choose New Module to see this

Select Module dialog.

3. Right-click on + next to Communications to expand, as in the

following dialog.

4. Choose the 1756-CNBR/D ControlNet Bridge.