Preface, Who should use this manual, Purpose of this manual – Rockwell Automation 1748 DataSite Configured Panel Installation Instructions User Manual
Page 5: Related documentation
5
Publication 1748-IN001B-EN-P - May 2009
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
•
who should use this manual
•
the purpose of this manual
•
related documentation
•
conventions used in this manual
Who Should Use this
Manual
Use this manual if you are responsible for designing, installing, programming,
or troubleshooting DataSite configured panels.
You should have a basic understanding of electrical circuitry and familiarity
with relay logic. If you do not, obtain the proper training before using this
product.
Purpose of this Manual
This publication is an installation manual for the DataSite configured panel. It
describes the procedures you use to install, wire, and troubleshoot the panel.
Related Documentation
The publications listed in this table contain more information on the DataSite
configured panel and other related devices.
Related publications for DataSite configured panel
Pub. Title
Pub. Number
Description
DataSite Accelerator Toolkit Quick Start
Information on how to set up functional DataSite
configurations to work with a ControlLogix L63 controller, a
PanelView Plus terminal, and an industrial computer
running FactoryTalk View.
DataSite Electronic Flow Meter and Remote Terminal Unit
Installation Instructions
Information on how to install a DataSite controller.
DataSite Electronic Flow Meter and Remote Terminal Unit
Hardware User Manual
Information on how to install and wire a DataSite controller.
DataSite Electronic Flow Meter and Remote Terminal Unit
Software User Manual
Information on how to install and use the software tools,
DS Settings, DS FloConfig, and DS DNP3 to configure and
monitor DataSite controllers.
DataSite Customized Function Blocks Reference Manual
Description of the customized function blocks used for
programming DataSite controllers using ISaGRAF software.
Advanced Interface Converter (AIC+) User Manual
A description on how to install and connect an AIC+.
This manual also contains information on network wiring.
DeviceNet Interface User Manual
Information on how to install, configure, and commission a
DNI.
DF1 Protocol and Command Set Reference Manual
Information on DF1 open protocol.