Rockwell Automation 1748 DataSite Configured Panel Installation Instructions - Manual (Page 17)

Publication 1748-IN001B-EN-P - May 2009
Install and Wire the Panel 17
Panel Weights The weight of the DataSite configured panel depends on the battery included.
The following are the approximate weights of the panel for each battery
option:
• With a 14 Ah battery: 9.07 kg (20 lb)
• With a 28 Ah battery: 13.61 kg (30 lb)
• With a 56 Ah battery: 20.41 kg (45 lb)
Mounting When planning the location for your DataSite configured panel, be sure to
consider the following:
• Conduits
• Installation type and requirements for mounting
• Connection to other equipment
• Future needs
• Ambient considerations: The environment must be compatible with the
enclosure rating of the equipment.
When your panel was purchased, an option was available to purchase a pole or
wall-mounting kit. In addition to properly mounting your control panel, other
items such as radios, solar panels, auxiliary devices, sensors and
incoming/outgoing cables will have to be installed to complete the installation
of your DataSite configured panel.
The pole or wall mounting kit provided with the DataSite configured panel
includes instructions on how to use those kits to properly mount the panel.
Refer to those instructions for clear directions on how to mount the panel.