Rockwell Automation 1748 DataSite Configured Panel Installation Instructions - Manual (Page 28)

Publication 1748-IN001B-EN-P - May 2009
28 Energizing and Commissioning
2. Energize the remote power source of the DataSite controller.
3. Energize the main devices followed by the feeder devices and the
branch circuit devices. Always energize from the source of the system,
working toward the loads.
DataSite Commissioning
For information regarding the commissioning of the DataSite controller, refer
to the DataSite Hardware User Manual, publication
1758-UM001 .
Radio Commissioning
When the DataSite configured panel is equipped with a factory supplied radio
(optional), refer to the radio manufacturer’s user manual supplied with the
DataSite configured panel. The radio user manual can also be found by
contacting the Rockwell Help Desk at 414-382-1616.
Software Commissioning
For information regarding the commissioning of the DataSite software, refer
to the DataSite Software User Manual, publication
1758-UM002 .
ATTENTION
After all of the disconnect devices have been closed, loads may
be energized.