Common techniques used in this manual, For additional information – Rockwell Automation 1794-IF4I, -OF4I, IF2XOF2I, -IF4IXT, -IF4ICFXT, -OF4IXT, IF2XOF2IXT FLEX I/O Isolated Analog Modules User Manual
Page 4

Publication 1794-6.5.8 - January 2010
Preface 4
Common Techniques Used
in this Manual
The following conventions are used throughout this manual:
•
Bulleted lists such as this one provide information, not
procedural steps.
•
Numbered lists provide sequential steps or hierarchical
information.
For Additional Information
For additional information on FLEX I/O systems and modules, refer to
the following documents:
Writing Configuration to and
Reading Status from Your
Module with a Remote I/O
Adapter
Explains how to configure
your modules and read
status information from your
modules when using a
remote I/O adapter
Communication and I/O
Image Table Mapping with
the DeviceNet/ControlNet
Adapter
Explains how you
communicate with your
modules, and how the I/O
image is mapped when
using a DeviceNet adapter
Input, Output, Status and
Configuration Files for
Analog Modules when used
with ControlNet
Explains how you
communicate with your
modules over ControlNet.
Explains how to calibrate
your module.
Specifications for the
isolated analog modules
Class I, Division 2, Group A,
B, C, D Hazardous Locations
Statement
Hazardous location approval
Section
Title
Contents
Catalog Numbers
Voltage
Description
Publications
Installation
Instructions
User Manual
1794
1794 FLEX I/O Product Data
1794-2.1
1794-ACN
24V dc
ControlNet Adapter
1794-5.8
1794-ACNR
24V dc
Redundant Media ControlNet Adapter
1794-5.18
1794-ADN
24V dc
DeviceNet Adapter
1794-5.14
1794-6.5.5
1794-ASB/C
24V dc
Remote I/O Adapter
1794-5.46
1794-6.5.9