Rockwell Automation 1606-XLS960FE Power Supply Reference Manual - Manual (Page 10)

All parameters are specified at 48V, 20A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
10 Rockwell Automation Publication 1606-RM018A-EN-P — February 2014
Bulletin 1606 Switched Mode Power Supplies
10. Remote Control of Output Voltage
This capacity is not supported by the 1606-XLS960FE unit.
11. Internal Data Logging
A protected microcontroller inside the power supply acquires and stores operating data during the life of the unit. The
data can be downloaded with a small tool and special software by Rockwell Automation service and repair personnel, as
well as in many instances should the unit fault. The stored data facilitates troubleshooting. Events occuring just before
a failure can be analyzed much more accurately.
Acquired data:
- Family name of unit (1606-XLS), revision of firmware
- Operational hours
- Expired portion of lifetime (combination of temperature and period of time)
- Maximum ambient temperatures with timestamp (max. 47 values)
- Maximal input voltages with timestamp (max. 47 values) and type of input voltage (AC or DC)
- Failure report (various internal errors)
- Number and timestamp (max. 20 values) of input overvoltage transients
- Number and timestamp (max. 20 values) of over-temperature shut-downs
- Number of turn-on sequences
The data will be acquired at a fixed sampling rate unless the peak detectors do trigger due to an abnormal
condition. In such cases, the abnormal condition will be captured. Furthermore, data will always be gathered just
before the unit switches off.