Preface, Conventions used in this manual, Rockwell automation support – Rockwell Automation 20-750-PNET2P Profinet Dual Port Option Module User Manual
Page 9: Local product support, Technical product assistance
Rockwell Automation Publication 750COM-UM007A-EN-P - January 2013
9
Preface
This manual provides information about the 20-750-PNET2P Profinet Dual-
port option module for network communication and how to use the module
with PowerFlex 750-Series drives.
Conventions Used in This
Manual
The following conventions are used throughout this manual:
• Parameter names are shown in the format Device Parameter xx - [*] or Host
Parameter xx - [*].
The xx represents the parameter number. The *
represents the parameter name—for example
Device Parameter 01 - [Port
Number].
• The firmware revision number (FRN) is displayed as FRN X.xxx, where
‘
X’ is the major revision number and ‘xxx’ is the minor revision number.
• The dialog box images in this manual resulted from using the following
software:
–
ProfinetCommander software, version 3.1
–
Simatic NCM Manager, version 5.4-SP5-HF1
–
DriveExplorer Full software, version 6.02.99
Different versions of the software may have dialog boxes that vary in
appearance, and differences in procedures.
Rockwell Automation
Support
Rockwell Automation offers support services worldwide, with over 75 sales and
support offices, over 500 authorized distributors, and over 250 authorized
systems integrators located through the United States alone. In addition,
Rockwell Automation representatives are in every major country in the world.
Local Product Support
Contact your local Rockwell Automation representative for the following:
• Sales and order support
• Product technical training
• Warranty support
• Support service agreements
Technical Product Assistance
For technical assistance, please review the information in
,
, first. If you still have problems, then access the Allen-Bradley
Technical Support website at
contact
Rockwell Automation.