Rockwell Automation 20-750-PNET2P Profinet Dual Port Option Module - Manual (Page 64)

64 Rockwell Automation Publication 750COM-UM007A-EN-P - January 2013
Chapter 7 Troubleshooting
46 Peer IO Timeout The option module has not received a Peer I/O message for longer than the Peer I/O Timeout.
47-54 Reserved —
55 DHCP Response The option module received a response to its DHCP request.
56 Email Failed The option module encountered an error attempting to send a requested e-mail message.
57 Option Card Flt Internal option module faults.
58 Module Defaulted The option module has been set to defaults.
59 PN WD Timeout A watchdog is detected in the Profinet ASIC.
60 No MAC Addr MAC address has not been assigned, or invalid MAC address.
61 P1 - Net Link Up A network link is available at Port 1 of the option module.
62 P1 - Net Link Down The network link is removed from Port 1 of the option module.
63 P2 - Net Link Up A network link is available at Port 2 of the option module.
64 P2 - Net Link Down The network link is removed from Port 2 of the option module.
Table 5 - Option Module Events (Continued)
Code Event Text Description