Rockwell Automation 20-750-PNET2P Profinet Dual Port Option Module - Manual (Page 72)

72 Rockwell Automation Publication 750COM-UM007A-EN-P - January 2013
Chapter 8 Viewing the Option Module Web Pages
Figure 11 - DOS Dialog Box Example Showing Email Server IP Address
3. Click Save Changes.
Figure 12 shows an example email message automatically sent by the option
module in response to selected events.
Figure 12 - Example of Email Message Sent by the Option Module
IMPORTANT After configuring E-mail Notification, we recommend protecting
the settings. Otherwise the configuration can be changed
anytime the web page is accessed with a browser. To protect the
settings, use Device Parameter 20 - [Web Features] to set E-
mail Cfg Bit 0 value to ‘0’ (Disabled).
TIP To stop email messages, uncheck all of the ‘Send an e-mail message
when…’ boxes.
Disabling the option module web pages by setting Device Parameter 19
- [Web Enable] to ‘0’ (Disabled) will not stop the option module from
sending email messages.