Rockwell Automation 842E EtherNet/IP Absolute Encoder User Manual - Manual (Page 9)

Rockwell Automation Publication 842E-UM001A-EN-P May 2012 1
Chapter
1
Safety
This chapter deals with your own safety and the safety of the equipment
operators.
Please read this chapter carefully before working with the 842E EtherNet/IP
encoder or the machine or system in which the 842E EtherNet/IP encoder is
used.
Authorized personnel
The following qualifications are necessary for the various tasks:
Correct use The 842E EtherNet/IP encoder is an instrument that is manufactured in
accordance with recognized industrial regulations and meets the quality
requirements as per ISO 9001:2008 as well as those of an environment
management system as per ISO 14001:2009.
An encoder is a device for mounting that cannot be used independent of its
foreseen function. For this reason an encoder is not equipped with immediate
safe devices.
ATTENTION
The 842E EtherNet/IP encoder must only be installed, commissioned, and
serviced by authorized personnel.
Repairs to the 842E EtherNet/IP encoder are only allowed to be undertaken by
trained and authorized service personnel from Rockwell Automation.
Activity Qualification
Mounting Basic technical training
Knowledge of the current safety regulations in the
workplace
Electrical installation
and replacement Practical electrical training
Knowledge of current electrical safety regulations
Knowledge on the use and operation of devices in the
related application (e.g., industrial robots, storage, and
conveyor technology)
Commissioning,
operation, and
configuration Knowledge on the current safety regulations and the use
and operation of devices in the related application
Knowledge of automation systems (e.g. Rockwell
ControlLogix controller)
Knowledge of EtherNet/IP
Knowledge of the usage of automation software (e.g.
Rockwell RSLogix)