Rockwell Automation 22B PowerFlex 40 Configured AC Drives User Manual
Powerflex 40 configured ac drives
This manual is related to the following products:
Table of contents
Document Outline
- PowerFlex 40 Configured AC Drives Installation Instructions
- Important User Information
- Table of Contents
- Preface
- Chapter 1
- PowerFlex 40 Standard Configured Drive Standard Features and Options
- Standard Features
- Enclosure Options
- Communication Options
- Power Disconnect Options
- Operator Device Options
- Hand/Off/Auto Selector Switch (Position 16+, Code S1)
- Auto/Manual Selector Switch (Position 16+, Code S4)
- Start and Stop Push Buttons (Position 16+, Code S7)
- Forward/Reverse Selector Switch (Position 16+, Code S8)
- Local Speed Potentiometer (Code S18)
- Local Control Off/Run Forward and Local/Remote Selector Switches (Code S20)
- Local/Off/Remote Selector Switch With One Normally Open Interposing Relay (Code S21)
- Spring Return Hand-Off-Auto Selector Switch (Code S22)
- Clear Fault Push Button (Code S23)
- Quick Disconnects
- I/O Options
- PowerFlex 40 Standard Configured Drive Standard Features and Options
- Chapter 2
- Chapter 3
- Appendix A
- Appendix B
- Back Cover / Publication 23B-IN001K-EN-P September 2013