USG Casting Fireplace Surrounds - Manual (Page 32)

Manufactured by
United States Gypsum Company
Industrial Products Division
125 South Franklin Street
Chicago, IL 60606 800 487.4431
www.usg.com IG1661/7-05
©2005, United States Gypsum Company
Printed in U.S.A.
Warning
Spraying mist or vapors created
from product may cause eye,
skin, nose, throat or upper respi-
ratory irritation. Avoid inhalation
of mist or vapors. Inhalation of
vapors or mist may cause
headache, nausea or irritation
of nose, throat and lungs. Use
in a well-ventilated area. Keep
container closed when not in
use. Wear a NIOSH/MSHA-
approved organic vapor/mist
respirator as necessary. Use
proper ventilation to reduce
mist/vapor exposure. Avoid
eye contact and prolonged skin
contact. Can cause severe eye
irritation. Wear eye protection. If eye contact occurs, immedi-
ately flush thoroughly with water
for 15 minutes. Prolonged or
repeated contact with skin
can cause irritation. Wear water-
proof gloves and protective long-
sleeve work clothing for skin
protection. If skin contact occurs,
wash thoroughly with soap and
water. If eye or skin irritation
persists, get medical attention.
Do not ingest. If ingested,
call physician. Product safety
information: (800) 507-8899
or www.usg.com
KEEP OUT OF REACH OF
CHILDREN. Trademarks
The following trademarks used
herein are owned by United
States Gypsum Company or a
related company: E
NDURACAST ,
H YDROCAL .
Notice
We shall not be liable for
incidental or consequential
damages, directly or indirectly
sustained, nor for any loss
caused by application of these
goods not in accordance with
current printed instruction or
for other than the intended use.
Our liability is expressly limited
to replacement of defective
goods. Any claim shall be
deemed waived unless made
in writing to us within thirty
(30) days from date it was or
reasonably should have been
discovered.
Safety First!
Follow good safety and industrial
hygiene practices during handling
and installation of all products
and systems. Take necessary
precautions and wear the appro-
priate personal protective equip-
ment as needed. Read material
safety data sheets and related
literature on products before
specification and/or installation.