USG Structo-Crete Structural Concrete Panel - Manual

Manufactured by
United States Gypsum Company
550 West Adams Street
Chicago, IL 60661
SCP14-A/11-11
© 2011, United States Gypsum Company
Printed in U.S.A.
caused by application of these
goods not in accordance with
current printed instruction or
for other than the intended
use. Our liability is expressly
limited to replacement of
defective goods. Any claim
shall be deemed waived unless
Company or a related
company: S tructo -c rete ,
USG, USG in stylized letters.
Notice
We shall not be liable for
incidental or consequential
damages, directly or indirectly
sustained, nor for any loss
Product Information
See structo-crete.com for
the most up-to-date product
information.
Trademarks
The following trademarks
used herein are owned
by United States Gypsum
made in writing to us within
thirty (30) days from date it
was or reasonably should have
been discovered.
Safety First!
Follow good safety/industrial
hygiene practices during
installation. Wear appropriate
personal protective equipment.
Read MSDS and literature
before specification and
installation.
888 STRUCTO (787.8286)
structo-crete.com
usgdesignstudio.com
6"
12"
TYPICAL FASTENER
SPACING
MINIMUM CLEAR SCREW
DISTANCE MUST BE
3/8" FROM EDGE
STRUCTUR
AL P
ANEL
TM
MIN.
0.36"
MIN.
1 5/8"
FLOOR SYSTEM
PANEL FASTENING
· USE ONLY #8 SCREW WITH 1-5/8" JOIST FLANGE. LARGER SCREW SIZE REQUIRES A LARGER JOIST FLANGE.
· APPLY SCREWS WITH A STAND-UP GUN TO REDUCE FATIGUE.
· FOR MAXIMUM CORROSION RESISTANT PERFORMANCE, STAINLESS STEEL FASTENERS ARE RECOMMENDED.
· FOLLOW FASTENING SCHEDULE IN CONTRACT DOCUMENTS.
· PROPER FALL RESTRAINT EQUIPMENT REQUIRED.
· USE ONLY #8 SCREW WITH 1-5/8" JOIST FLANGE; LARGER SCREW SIZE REQUIRES A LARGER JOIST FLANGE
· APPLY SCREWS WITH A STAND-UP GUN TO REDUCE FATIGUE
· FOR MAXIMUM CORROSION RESISTANT PERFORMANCE, STAINLESS STEEL FASTENERS ARE RECOMMENDED
· FOLLOW FASTENING SCHEDULE IN CONTRACT DOCUMENTS
· PROPER FALL RESTRAINT EQUIPMENT REQUIRED
Structo-Crete
™
Structural Concrete Panel
Tip Sheet
Floor Assembly
Panel Fastening