USG ENVIRO-SHIELD Bonded Fiber Matrix Application Rates User Manual
Application rates and loading procedures
IG8477
Application Rates and Loading Procedures
Material:
The bonded fiber matrix (BFM) shall be designed for application by conventional hydroseeding
equipment and contain a blend of paper, thermally heat treated cellulosic fiber mulch (paper/soft
wood), cross linked hydrocolloid tackifier, fiber-reinforced gypsum pre-mix that upon drying, forms
a breathable, built-in-place, protective blanket that reduces water and wind induced erosion. The
gypsum content will act as a binder initially, and then slowly degrade with exposure to the
elements, gradually releasing calcium and sulfur nutrients to plants and soils. This side benefit is
not intended to be an integral part of your soil fertility program. The bonded fiber matrix product
shall be non-toxic and biodegradable.
Purpose:
• To minimize erosion and to hold soil in place temporarily
• To allow time for the establishment of grass or other plants for permanent erosion control
• To hold seed in place and optimize growth conditions
Typical Application Rate:
<3:1 slope - 3000 lbs/ac
3:1 to 2:1 - 3500 lbs/ac
>2:1 slope - 4000 lbs/ac
E
NVIRO
-S
HIELD
TM
Brand Bonded Fiber Matrix can be mixed at 70 lbs (+/- 10lbs) per 100 gallons of water.
Please consult your local United States Gypsum Company representative for more information as soil,
slopes and weather conditions vary greatly across the country.
Packaging:
Bales: Net weight - 50 lb, UV resistant plastic film
Pallets: 40 x 48 stretch – wrapped
Truckload – 840 bales – 24 pallets
Storage:
Store inside in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.
Protect product bags from physical damage and weather to prevent moisture contact. Freezing
temperatures and other conditions causing presence of liquid will harden this material during storage.
When transported to job-site, material must be tarped against weather conditions.
Shelf Life:
Product shelf life is 4 months
Equipment
Shall be of the type described as a “H
YDROSEEDER
®
/Hydromulcher” machine. The equipment used to
apply the BFM shall be equipped to eject the mixture at a uniform rate to provide the coverage specified.