Brother IntelliFAX 4100e - Manual (Page 69)

S E T U P S E N D 6 - 5
Basic Sending Operations
Contrast
If your document is very light or very dark, you might want to set the contrast.
Use
S.LIGHT to send a very light document. Use S.DARK to send a very dark
document.
1
Place the original face down in the ADF.
2
Press Menu, 2, 2, 1.
3
Use or to select AUTO , S.LIGHT or S.DARK , and then press Set.
4
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings, and
go to Step 5.
5
Enter a fax number, and then press Fax Start to send a fax.
Fax Resolution
When you have an original in the ADF, you can use the Resolution key to
temporarily change the setting. Press Resolution repeatedly until the LCD
shows the setting you want.
—OR—
You can change the default setting.
1
Press Menu, 2, 2, 2.
2
Press or to select the resolution
you want, and then press Set.
3
Press Stop/Exit.
STANDARD —Suitable for most typed documents.
FINE —Good for small print; transmits a little slower than Standard resolution.
S. FINE —Good for small print or artwork; transmits slower than Fine
resolution.
PHOTO —Use when original has varying shades of gray; slowest transmission
time.
1 . C O N T R A S T
2 . F A X R E S O L U T I O N