Brother IntelliFAX 4100e - Manual (Page 108)

13 - 2 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
COOLING DOWN The temperature of the drum unit or
toner cartridge is too hot. The
machine will pause its current print
job and go into cooling down mode.
During the cooling down mode, you
will hear the cooling fan running
while the display on the machine
shows
COOLING DOWN .
You must wait and allow the
machine to resume printing when it
is ready.
COVER OPEN
PLS CLOSE COVER The front cover was not completely
closed. Close the front cover for the drum
unit.
DISCONNECTED The other party or other party’s fax
machine terminated the call. Try to fax or receive again or call
the other party to see what
happened.
CHECK
ORIGINAL Originals did not feed properly or
original was too long. Do not pull paper out until you read
Page 13-4.
MACHINE ERROR
XX The machine has a mechanical
problem. Turn the power off. Then call
Brother Customer Service at:
In USA:
1-800-284-4329
In Canada: 1-877-BROTHER
In Montreal: (514) 685-6464
OUT OF MEMORY
(May occur when the
machine is used as a
printer)
The machine memory capacity has
been exceeded. • If you have installed the
Windows ® driver, try again after
setting the True Type mode to
“Print as Graphics” in the Print
menu of your application
software.
• Reduce the print resolution or
reduce the complexity of your
document.
NO RESPONSE /
BUSY The number you called does not
answer or is busy.
Or, you may have reached a number
that is not connected to a fax
machine. Check the number and try again.
NOT REGISTERED The One Touch or Speed Dial
number that you accessed is not
programmed. Set up the One Touch or Speed Dial
number.
(See Pages 7-1 and 7-2.)
Error Messages
Error Message Cause Action